How To Refinish Your Kitchen Cabinets

How To Refinish Your Kitchen Cabinets

by

Jay Smithy

Refinishing kitchen cabinets is an easy task if you know what to do and how to do it. With all the tools and knowledge, you could give your kitchen cabinets a complete makeover in just a few days. Within this article I will give you step by step instructions on how to refinish kitchen cabinets and transform your kitchen into the kitchen you desire.

Before refinishing your kitchen cabinets, it is essential that you perform through planning in order to give your cabinets the perfect finish and attain the best results. Before you begin, you will need a few tools which are essential for the job if you are aiming to give your cabinets a perfect finish. The following tools are required – Set of screwdrivers Paint brushes Sanding blocks Scrapers Masking tape An old cloth or other material which you can use to protect surfaces Paint stripper Wood putty Purchase refinishing tools here Step 1 – Completely empty the cabinets that you wish to refinish Step 2 – Remove all of the cabinets shelves and doors. It may be worth labelling your parts to make things easier when you need to reconnect the shelves and doors. Step 3 – Perform a through clean of the cabinets. It is important that you remove any dust or dirt which is on the cabinets to ensure that the paint settles correctly and produces an even layer throughout. If you do not correctly clean your cabinets it may cause problems to the paint and may hinder your results. The best thing to do is apply paint stripper to a damp cloth and give each cabinet a full wipe down. The paint stripper will help remove any stubborn grease or dirt from the cabinets. Step 4 – Completely remove any paint which is currently on your cabinets. Removing the paint is not always necessary, however if you wish to finish your cabinets in a clear varnish or gloss, it is essential that you remove the current paint using a sander and paint stripper. You should sand the cabinets down as much as possible before applying paint stripper so that the excess paint can be removed from the cabinets without causing any problem. After you have sanded the cabinets as much as possible, simply apply paint stripper to an old cloth and give the cabinets a full wipe down in order to remove any excess paint. Step 5 – Fill in any dents or chips that you may find on your cabinets with wood putty. It is important that you inspect your cabinets and locate any dents or chips as failure to do so may cause problems when it comes to painting your cabinets. The quickest way to find dents and chips in your cabinets is to slowly run your hand over each of the cabinets and try to feel any abnormalities within the wood surface. Step 6 – Apply primer to the cabinets in order to create a layer that will bond with your paint. It is important that you apply primer to your cabinets as it brings out the colour in the paint and gives your cabinets the most effective finish. Primer also helps to stop the paint from running and can also help when you are aiming to apply your paint over the cabinets in an even layer. Step 7 – Apply the paint of choice to your cabinets to complete the refinishing process. There are many different types of paint available on the market and I recommend that you take your time when choosing which paint to go for if you would like to give your cabinets the best refinish possible.

Visit the site of

refinishing kitchen cabinets

for more information about the different methods which can be used to refinish your cabinets.

Article Source:

ArticleRich.com